If you are looking to install granite countertops, most manufacturers and ask you to provide a design of the existing counters for a free phone or email estimate. Drawing your kitchen counters may seem complicated, but with these tips, your design will be ready in no time.

Start by drawing counters as simple rectangles and squares. Graphing paper works best, but a clean sheet of printer paper will be good in a pinch. The design does not have to be to scale, but try to keep the right proportions. Sketch each meter, including islands, peninsulas, bar tops, and ledges. Indicate the location of their equipment with clear words. This will help you keep track of your measurements and gives manufacturers a visual representation of your kitchen.

marks the toilet as a rounded rectangle. With laminate counters, the receiver is mounted from above. granite counters allow you to choose between the top mounting and mounting the sink. Mount sinks require a polished cutout that exposes the model and color of granite. Because the sinks are available in a variety of sizes, shapes and styles, most sinks include a template for cutting. For the purposes of drawing, the size and shape does not matter, but you must specify top mount or mountain.

most kitchens have a back wall, a section of granite that lines the wall behind the sink. four-inch height backsplashes are the most common, but there are several options. Some owners opt for full backsplashes counter covering the wall above the cabinets, and some do not choose to have a backsplash at all. Backsplashes have a practical purpose as the protection of the water walls or covering the skin of the wall.

backsplashes are usually installed where the counter meets a wall, but they should not object to the equipment or wooden panels. The easiest way to indicate backsplashes in design is to draw a narrow rectangle along each counter. If you’re not sure which option is best for your dashboard kitchen, ask your manufacturer to estimate the price of multiple options.

If your kitchen includes an oven (as opposed to a separate oven), mark its location marked with a rectangle. Due to the size of the hole, stove cuts are usually made at the place of installation.

Finally, the mark to finish the edges with an X “.” Because granite is a solid surface, the profiles can be carved along the exposed edges. Granite manufacturers can produce a variety of finished edge profiles that range in price. Mark the edges would be exposed, except the edges where the meter is a device

sure to include information on her options. Granite color, size of the rear wall (4 “all or nothing), and finished the edge profile. These options will be needed for an accurate estimate. Include your contact information, including your full name, address, phone number and address e-mail.

That’s it! Before sending your design to the manufacturer, will have to take some action. A tape measure works best, and can help I have a friend around to hold the other end.

More Kitchen Counters articles